Galaxy PLA - Champagne Gold

  • Galaxy PLA - Champagne Gold

Galaxy PLA - Champagne Gold



 Galaxy PLA is a deep metallic colored PLA range - based on our EasyFil PLA compound - with an incredibly high amount of silver aluminum-flakes added. The high added aluminum-flake content gives a beautiful sparkling, reflecting and glittering finish to Galaxy PLA printed objects.

Due to the high amount of silver aluminum-flakes added to the Galaxy PLA compound you can 3D print beautiful shimmering objects without visible layers and subtle color shadings and radiance. Even though its high silver-aluminum-flaked content Galaxy PLA is not abrasive to the nozzle of your 3D printer.


Unique features

  • Extremely glittering & shimmering surface finish
  • 3D print objects without visible layers
  • Not abrasive to the nozzle of 3D printers
  • Incredibly deep colored 3D printer filament
  • Very easy to print
    • Warp-free printing and no deformation after cooling
    • Improved flowing behavior and inter-layer adhesion
    • Good first layer adhesion to several (un)heated print surfaces


General printing guidelines *

Nozzle size: ≥ 0.4mm

Layer height: > 0.1mm

Flow rate: ± 100%

Print temp: ± 200 - 230° C

Print speed: Medium

Retraction: Yes ± 5mm

Heat bed: ± 0 - 60° C

Fan speed: 50-100%

Printing surface: Blue Tape / Glass

Enclosed printer needed: No

Heated Build Chamber: No

Experience level: Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.


Filament length

ρ: 1.24 g/cc

50 gr coil

0.75 Kg spool

Ø 1.75mm

± 16.8m

± 251m

Ø 2.85mm

± 6.3m

± 95m