Recycled Filament ReForm™ rTitan- OFF-BLACK 1.75mm

$45.99
  • Recycled Filament ReForm™ rTitan- OFF-BLACK 1.75mm

Recycled Filament ReForm™ rTitan- OFF-BLACK 1.75mm

$45.99

Description

ReForm rTitan is based on exactly the same unique formulation as our TitanX filament range, but is made out of residual extrusion waste that are re-compounded and homogenized into a high-end and FDM/FFF-optimized upcycled TitanX-based filament with significantly less environmental impact. 

Unique features

  • 100% upcycled/recycled filament with retaining the unsurpassed printing properties of TitanX.
    • Less environmental impact by quality controlling and re-using extrusion waste streams
  • Sustainable packaging
    • ReForm filaments are spooled on easy to recycle and dispose recycled cardboard spools
    • ReForm filament is packaged in recycled carton boxes
  • FDM/FFF-optimized
    • Warp-free printing
    • Optimized filament flowing behavior and inter-layer adhesion
    • Excellent adhesion to heated glass plate, Kapton tape or PET tape
  • Compliant to FDA food and drink contact articles
  • Greatly improved mechanical properties, strength, and impact resistance 

General printing guidelines *

Nozzle size: ≥ 0.15mm

Layer height: ≥ 0.1mm

Flow rate: ± 110%

Print temp: ± 195 - 225° C

Print speed: High

Retraction: Yes - 6mm

Heat bed: ± 65 - 75° C

Fan speed: 50-100%

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are many different types of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.